FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

SUMMARY: Assists in the implementation of procedures for quality assurance test and measurement programs. Conducts tests and inspections of a moderately complex nature.ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Other duties may be assigned.Assists in devising, revising, and implementing methods and procedures for inspecting, testing, and evaluating components and finished products.Maintains test and measurement equipment in proper calibration.Verifies specified requirements of samples by using micrometer, optical components, resistance meters, calipers, scales, microscopes and other equipment as required.Assists with qualification and testing programs by performing functional testing as directed by applicable specifications.Performs statistical analysis to assess costs, disposition, and propose corrective actions for non-conforming materials.Updates and distributes results of the quality reporting system.Maintains records concerning the processing of customer returns and corrective action correspondence.Trains and provides assistance to product inspectors.Performs special testing functions.Applies and maintains quality standards by use of internal facility audits.KNOWLEDGE, SKILLS, AND ABILITIESRequires knowledge typically acquired through:Completion of a High school diploma or general education degree (GED),One to three years of related experience or training; and/or equivalent combination of education and experience.Ability to read and interpret documents such as safety rules, blue prints, wiring diagrams, operating and maintenance instructions, and procedure manuals.Ability to write simple correspondence.Ability to effectively present information in one-on-one and small group situations.Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form.QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, talk, hear, walk, and use hands to finger, handle, or feel objects, tools, and controls, and reach with arms and hands. The employee may be required to occasionally lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, depth perception and the ability to adjust focus.Individuals performing incoming and final inspection must meet minimum standards in at least one eye, corrected or uncorrected, of average or normal on a one time only color vision test and 20/25 on a 12 month near vision test.WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts and is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.MN STATE POSTING REQUIREMENTSSALARY RANGE: $16/HR - $27/HR (depends on level of experience I, II, or III) BENEFITS DESCRIPTIONCompetitive wages for all team members paid weeklyEligible contributions to 401K at date of hire401K Roth Contributions & After-Tax ContributionsPaid Vacation, Holidays, and 1 additional Personal Day (Accrue at date of hire)Bonus Day(s) awarded annually based on company performance Paid Parental LeaveMedical, Dental and Vision BenefitsFlexible and Health Savings AccountsProfessional Development & TrainingTuition AssistanceCompany sponsored Life Insurance , Short-Term & Long -Term Disability, and Employee Assistance ProgramEmployee Referral Bonus Program[Equal Opportunity Employer - Disability/Vet]This job may require applicant to conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITARhere.

Req ID:455725Address: 8708 Crossing Drive Rockville, MN, 56301Benefits: * Fuel Your Growth with Love's - company funded tuition assistance program* Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Hiring Immediately Welcome to Love’s!Diesel Technicians work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Job Functions: Troubleshoot and repair light mechanical issues that may include wheel-end assemblies, electrical systems, suspensions, A/C, or engine componentsAssist customers with roadside servicesProvide preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer. Veterans encouraged to apply.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

US LBM is one of the leading and fastest growing distributors of specialty building materials in the United States, with a team of over 15,000 employees located throughout the country. Since our founding in 2009, we have acquired over 70 companies and have expanded to more than 500 locations serving 37 states. US LBM is a progressive organization that promotes a unique culture that focuses on the value of its customers and associates. Developing our people is critical to our strategy and fostering our culture of empowerment.Carpentry Contractors Company, a Division of US LBM is seeking a Framing Carpenters for jobsites around the Twin Cities area.Schedule: Mon-Fri: 7:00AM - 4:30PMWage: $20.00 - $30.00 per hour based on experience.A Brief OverviewThe Carpenter is responsible for performing carpentry tasks. This person will perform a variety of tasks in an assigned area as they construct, repair, restore, and install structural woodwork and related materials.What you will doAdhere to established safety rules and regulations by passing safety test and following all safety procedures; maintain a safe and clean environment.Communicate well with crew and foreman; follow directions provided by lead carpenter or foreman; and prioritize daily duties.Study specifications in blueprints, sketches or building plans to prepare project layout and determine dimensions and materials required.Provide required personal tools.Measure, calculate, and mark cutting lines on materials accurately, using ruler, pencil, chalk, and marking gauge; shape or cut materials to specified measurements, using hand tools, machines, or power saw.Square walls and install sheathing correctly.Assemble and fasten materials to make framework or props, using hand tools and wood screws, nails, dowel pins, or glue; install structures and fixtures, such as windows, frames, floorings, and trim, or hardware, using carpenter's hand and power tools.Select and supply crew, carpenters and leads with materials.Use proper nailing procedures for all applications.Use hand, pneumatic and other power tools to measure, cut and install sheathing for wall and roof, and all wall components.Finish, inspect and ensure work complies with quality standards and expectations.Keep jobsite clean and safe.Comply with Company's attendance policy by maintaining regular and predictable attendance.Education QualificationsHigh School Diploma or GED required.completion of an apprenticeship program, certificate or degree program at vocational school or community college (e.g. Certificate of Achievement in Carpentry Technology, an Associate of Applied Science in Carpentry-Building Trades or an Associate of Applied Science in Carpentry) preferred.Experience Qualificationsless than 1 year of carpentry experience in the commercial and/or residential sectors required.Skills and AbilitiesKnowledgeable of the standard methods, practices, principles, tools, and equipment used in the carpentry trade and its associated occupational hazards.Knowledgeable of the qualities, adaptability, and use of various woods and materials.Basic knowledge of state codes and procedures including energy codes. Must have good work ethic, attitude and be reliable. Solid basic math skills are necessary.Communicate, read, comprehend, and comply with Company's policies and procedures including safety and security. Understanding and commitment to a safe work environment in this "safety sensitive" position. Must be able to pass Safety test and follow all safety procedures.Available for overtime as needed.Licenses and CertificationsDL NUMBER - Driver License, Valid and in State along with reliable transportation required.Additional Potential Opportunities based on experience:CARPHELP - Carpenter HelperLEADCARP - Carpenter LeadUS LBM Holdings, LLC, is an equal-opportunity employer. We do not discriminate on the basis of race, color, religion, creed, national origin or ancestry, sex, age, physical or mental disability, veteran or military status, genetic information, sexual orientation, gender identity, marital status, military status, order of protection status, or any other legally recognized protected basis under federal, state, or local law.

Overview: ** Immediate opening for Sr. Automotive Repair Technicians/Mechanics **Pay: $75,000 - $120,000 per year (Flag pay structure)TGK Automotive Specialists – We have been serving our clients with honesty and integrity since 2007. We maintain the highest level of repair and service at a fair price and are devoted to client satisfaction.The Senior Automotive Technician is responsible for effectively and efficiently diagnosing and repairing customer vehicles while adhering to the MAP guidelines and in accordance with dealership, manufacturer’s, and company repair standards.Benefits:No SundaysCompetitive Bi-Weekly PayTuition ReimbursementPaid Vacation and Sick Time 6 Paid HolidaysMedical, Dental and Vision Insurance (Effective 1st of the Month after Hire)Life Insurance (Company paid)401(k) Retirement Savings Plan with Company MatchDiscounted Services on Personal and Immediate Family VehiclesOpportunity for Advancement!!!Principal Duties and Responsibilities:Diagnoses vehicles according to the appropriate level of certifications/experience.Performs work as outlined on the Multi-point Inspection and/or Repair Order with efficiency and accuracyPerforms complex and heavy-duty repairsExplains technical diagnosis and needed repairs to non-mechanical individuals which may include the Store Manager, Service Consultants and/or customersRecommends services that are necessary to keep the customer’s vehicle in running condition; properly documents all recommendations in customer fileFollows all safety procedures and reports any concerns to direct supervisorAdheres to Sun Auto’s core values, all company policies and procedures as outlined in the Employee HandbookAbility to work flexible schedules, Monday - FridayQualifications:Previous automotive technician / mechanic experience requiredASE certifications in lieu of experienceAbility to demonstrate proper use of computerized equipment for diagnosticsValid Driver’s licenseMust be at least 18 years oldHigh School Diploma or equivalent; Technical School experience preferredWorking Conditions and Physical Demands:The Senior Automotive Technician will be exposed to moderate to loud noises, dust, exhaust fumes, lubricants, petroleum products, vapors, caustic materials, and other hazardous and non-hazardous materials. The temperature in the work environment varies and could include extreme heat and/or extreme cold depending on the ambient temperatures outside. The use of safety goggles or other PPE may be required when working in these conditions.The Senior Automotive Technician must be able to meet the following physical requirements:Stand up to eight hours per day in the shop and able to walk to gain access to various areas of the buildingBend, stoop, kneel and crouch regularly throughout the day; must have full range of motion with arms and hands and be able to feel, handle or finger objects frequentlyLift and/or move up to 10 pounds regularly, lift and/or move up to 70 pounds frequently.Communicate with customers and shop personnelVision sufficient to detect color, depth, and re-focusReasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Other duties may be assigned.· Studies blueprints of product and die or mold and computes specifications.· Plans sequence of operations, visualizing shape of die or mold in reverse of product.· Measures, marks and scribes metal stock to lay out for machining.· Gives machining specifications to Tool Machine Set Up Operators or sets up and operates machines such as vertical mill, engine lathe and CNC milling machine to machine outer dimensions and contoured cavity of die or mold.· Uses surface grinder to fit parts for assembly and to smooth and finish cavity.· Assembles die or mold. Verifies dimensions.· Examines standard or previously used dies or molds, tools, and jigs and fixtures, and recommends design modifications regarding construction and function of part.· Keeps an accurate record of maintenance performed on all tools.KNOWLEDGE, SKILLS, AND ABILITIES Requires knowledge typically acquired through:· Completion of a two year vocational, trade, or technical degree,· Two to five years of related experience or training; and/or equivalent combination of education and experience.· Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals.· Ability to write routine reports and correspondence.· Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.· Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.· Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.· Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form.· Knowledge of heat treating steels required.QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, talk, hear, walk, and use hands to finger or handle or feel objects, tools and controls, and reach with arms and hands. The employee may be required to regularly lift and/or move up to 10 pounds and frequently lift and/or move from 25 to 50 pounds. Specific vision abilities required by this job include close vision, depth perception and the ability to adjust focus.WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made while performing the essential job functions of this job. While performing the duties of this job, the employee regularly works near moving mechanical parts and is occasionally exposed to fumes or airborne particles, risk of electrical shock, and vibration. The noise level in the work environment is usually moderate to loud.MN STATE POSTING REQUIREMENTSSALARY RANGE: $20/hr - $39/hr (depends on level of experience I, II, or III)BENEFITS OVERVIEW Competitive wages for all team members paid weeklyEligible contributions to 401K at date of hire401K Roth Contributions & After-Tax ContributionsPaid Vacation, Holidays, and 1 additional Personal Day (Accrue at date of hire)Bonus Day(s) awarded annually based on company performancePaid Parental LeaveMedical, Dental and Vision BenefitsFlexible and Health Savings AccountsProfessional Development & TrainingTuition AssistanceCompany sponsored Life Insurance , Short-Term & Long -Term Disability, and Employee Assistance ProgramEmployee Referral Bonus ProgramITAR COMPLIANCE This position requires access to or use of information which is subject to the federal International Traffic in Arms Regulations (ITAR). All applicants for this position must be U.S. Persons within the meaning of ITAR. ITAR defines “U.S. Person” as U.S. citizen, lawful permanent resident of the U.S., person admitted as a refugee to the U.S., person granted asylum in the U.S., or person granted the status of alien lawfully admitted for temporary residence to the U.S. under 8 U.S.C. 1160(a) (for special agricultural workers) or 8 U.S.C. 1255(a)(1) (an amnesty program).[Equal Opportunity Employer - Disability/Vet]This job may require applicant to conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITARhere.

US LBM is one of the leading and fastest growing distributors of specialty building materials in the United States, with a team of over 15,000 employees located throughout the country. Since our founding in 2009, we have acquired over 70 companies and have expanded to more than 500 locations serving 37 states. US LBM is a progressive organization that promotes a unique culture that focuses on the value of its customers and associates. Developing our people is critical to our strategy and fostering our culture of empowerment.We are seeking a Finish/Trim Carpenter. Wage: $20.00 to $25.00 per hour based on experienceA Brief OverviewThe Carpenter is responsible for performing carpentry tasks. This person will perform a variety of tasks in an assigned area as they construct, repair, restore, and install structural woodwork and related materials.What you will doAdhere to established safety rules and regulations by passing safety test and following all safety procedures; maintain a safe and clean environment.Communicate well with crew and foreman; follow directions provided by lead carpenter or foreman; and prioritize daily duties.Study specifications in blueprints, sketches or building plans to prepare project layout and determine dimensions and materials required.Provide required personal tools.Measure, calculate, and mark cutting lines on materials accurately, using ruler, pencil, chalk, and marking gauge; shape or cut materials to specified measurements, using hand tools, machines, or power saw.Square walls and install sheathing correctly.Assemble and fasten materials to make framework or props, using hand tools and wood screws, nails, dowel pins, or glue; install structures and fixtures, such as windows, frames, floorings, and trim, or hardware, using carpenter's hand and power tools.Select and supply crew, carpenters and leads with materials.Use proper nailing procedures for all applications.Use hand, pneumatic and other power tools to measure, cut and install sheathing for wall and roof, and all wall components.Finish, inspect and ensure work complies with quality standards and expectations.Keep jobsite clean and safe.Comply with Company's attendance policy by maintaining regular and predictable attendance.Education QualificationsHigh School Diploma or GED required.completion of an apprenticeship program, certificate or degree program at vocational school or community college (e.g. Certificate of Achievement in Carpentry Technology, an Associate of Applied Science in Carpentry-Building Trades or an Associate of Applied Science in Carpentry) preferred.Experience Qualificationsless than 1 year of carpentry experience in the commercial and/or residential sectors required.Skills and AbilitiesKnowledgeable of the standard methods, practices, principles, tools, and equipment used in the carpentry trade and its associated occupational hazards.Knowledgeable of the qualities, adaptability, and use of various woods and materials.Basic knowledge of state codes and procedures including energy codes. Must have good work ethic, attitude and be reliable. Solid basic math skills are necessary.Communicate, read, comprehend, and comply with Company's policies and procedures including safety and security. Understanding and commitment to a safe work environment in this "safety sensitive" position. Must be able to pass Safety test and follow all safety procedures.Available for overtime as needed.Licenses and CertificationsDL NUMBER - Driver License, Valid and in State along with reliable transportation required.Additional Potential Opportunities based on experience:CARPHELP - Carpenter HelperLEADCARP - Carpenter LeadUS LBM Holdings, LLC, is an equal-opportunity employer. We do not discriminate on the basis of race, color, religion, creed, national origin or ancestry, sex, age, physical or mental disability, veteran or military status, genetic information, sexual orientation, gender identity, marital status, military status, order of protection status, or any other legally recognized protected basis under federal, state, or local law.

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

US LBM is one of the leading and fastest growing distributors of specialty building materials in the United States, with a team of over 15,000 employees located throughout the country. Since our founding in 2009, we have acquired over 70 companies and have expanded to more than 500 locations serving 37 states. US LBM is a progressive organization that promotes a unique culture that focuses on the value of its customers and associates. Developing our people is critical to our strategy and fostering our culture of empowerment.Carpentry Contractors Company, a Division of US LBM is seeking Deck and Remodel Carpenters for jobsites around the Twin Cities area.Schedule: Mon-Fri: 7:00AM - 4:30PMWage: $20.00 - $30.00+ per hour based on experience.What you will doAdhere to established safety rules and regulations by passing safety test and following all safety procedures; maintain a safe and clean environment.Communicate well with crew and foreman; follow directions provided by lead carpenter or foreman; and prioritize daily duties.Study specifications in blueprints, sketches or building plans to prepare project layout and determine dimensions and materials required.Provide required personal tools.Measure, calculate, and mark cutting lines on materials accurately, using ruler, pencil, chalk, and marking gauge; shape or cut materials to specified measurements, using hand tools, machines, or power saw.Square walls and install sheathing correctly.Assemble and fasten materials to make framework or props, using hand tools and wood screws, nails, dowel pins, or glue; install structures and fixtures, such as windows, frames, floorings, and trim, or hardware, using carpenter's hand and power tools.Select and supply crew, carpenters and leads with materials.Use proper nailing procedures for all applications.Use hand, pneumatic and other power tools to measure, cut and install sheathing for wall and roof, and all wall components.Finish, inspect and ensure work complies with quality standards and expectations.Keep jobsite clean and safe.Comply with Company's attendance policy by maintaining regular and predictable attendance.Education QualificationsHigh School Diploma or GED required.completion of an apprenticeship program, certificate or degree program at vocational school or community college (e.g. Certificate of Achievement in Carpentry Technology, an Associate of Applied Science in Carpentry-Building Trades or an Associate of Applied Science in Carpentry) preferred.Experience Qualificationsless than 1 year of carpentry experience in the commercial and/or residential sectors required.Skills and AbilitiesKnowledgeable of the standard methods, practices, principles, tools, and equipment used in the carpentry trade and its associated occupational hazards.Knowledgeable of the qualities, adaptability, and use of various woods and materials.Basic knowledge of state codes and procedures including energy codes. Must have good work ethic, attitude and be reliable. Solid basic math skills are necessary.Communicate, read, comprehend, and comply with Company's policies and procedures including safety and security. Understanding and commitment to a safe work environment in this "safety sensitive" position. Must be able to pass Safety test and follow all safety procedures.Available for overtime as needed.Licenses and CertificationsDL NUMBER - Driver License, Valid and in State along with reliable transportation required.Additional Potential Opportunities based on experience:CARPHELP - Carpenter HelperLEADCARP - Carpenter LeadUS LBM Holdings, LLC, is an equal-opportunity employer. We do not discriminate on the basis of race, color, religion, creed, national origin or ancestry, sex, age, physical or mental disability, veteran or military status, genetic information, sexual orientation, gender identity, marital status, military status, order of protection status, or any other legally recognized protected basis under federal, state, or local law.

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

US LBM is one of the leading and fastest growing distributors of specialty building materials in the United States, with a team of over 15,000 employees located throughout the country. Since our founding in 2009, we have acquired over 70 companies and have expanded to more than 500 locations serving 37 states. US LBM is a progressive organization that promotes a unique culture that focuses on the value of its customers and associates. Developing our people is critical to our strategy and fostering our culture of empowerment.We are seeking a Carpenter to install Windows and House Wrap for jobsites around the Twin Cities area.Schedule: Mon-Fri: 7:00AM - 4:00PMWage: $20.00 - $30.00+ per hour based on experience.A Brief OverviewThe Carpenter is responsible for performing carpentry tasks. This person will perform a variety of tasks in an assigned area as they construct, repair, restore, and install structural woodwork and related materials.What you will doAdhere to established safety rules and regulations by passing safety test and following all safety procedures; maintain a safe and clean environment.Communicate well with crew and foreman; follow directions provided by lead carpenter or foreman; and prioritize daily duties.Study specifications in blueprints, sketches or building plans to prepare project layout and determine dimensions and materials required.Provide required personal tools.Measure, calculate, and mark cutting lines on materials accurately, using ruler, pencil, chalk, and marking gauge; shape or cut materials to specified measurements, using hand tools, machines, or power saw.Square walls and install sheathing correctly.Assemble and fasten materials to make framework or props, using hand tools and wood screws, nails, dowel pins, or glue; install structures and fixtures, such as windows, frames, floorings, and trim, or hardware, using carpenter's hand and power tools.Select and supply crew, carpenters and leads with materials.Use proper nailing procedures for all applications.Use hand, pneumatic and other power tools to measure, cut and install sheathing for wall and roof, and all wall components.Finish, inspect and ensure work complies with quality standards and expectations.Keep jobsite clean and safe.Comply with Company's attendance policy by maintaining regular and predictable attendance.Education QualificationsHigh School Diploma or GED required.completion of an apprenticeship program, certificate or degree program at vocational school or community college (e.g. Certificate of Achievement in Carpentry Technology, an Associate of Applied Science in Carpentry-Building Trades or an Associate of Applied Science in Carpentry) preferred.Experience Qualificationsless than 1 year of carpentry experience in the commercial and/or residential sectors required.Skills and AbilitiesKnowledgeable of the standard methods, practices, principles, tools, and equipment used in the carpentry trade and its associated occupational hazards.Knowledgeable of the qualities, adaptability, and use of various woods and materials.Basic knowledge of state codes and procedures including energy codes. Must have good work ethic, attitude and be reliable. Solid basic math skills are necessary.Communicate, read, comprehend, and comply with Company's policies and procedures including safety and security. Understanding and commitment to a safe work environment in this "safety sensitive" position. Must be able to pass Safety test and follow all safety procedures.Available for overtime as needed.Licenses and CertificationsDL NUMBER - Driver License, Valid and in State along with reliable transportation required.Additional Potential Opportunities based on experience:CARPHELP - Carpenter HelperLEADCARP - Carpenter LeadUS LBM Holdings, LLC, is an equal-opportunity employer. We do not discriminate on the basis of race, color, religion, creed, national origin or ancestry, sex, age, physical or mental disability, veteran or military status, genetic information, sexual orientation, gender identity, marital status, military status, order of protection status, or any other legally recognized protected basis under federal, state, or local law.

FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment